2015 Technical Papers

 
Soneson, G.L., Horn, J.F., and Zheng, A., “Simulation Testing of Advanced Response Types for Ship-Based Rotorcraft,” Accepted for publication in Journal of the American Helicopter Society.

Grande, N., Tierney S., Horn J.F., and Langelaan J.W., “Safe Autorotation through Wind Shear via Backwards Reachable Sets,” Accepted for publication in Journal of the American Helicopter Society.

Krishnamurthi, J. and Horn J.F., “Helicopter Slung Load Control using Lagged Cable Angle Feedback,” Journal of the American Helicopter Society, Vol. 60, (2), April 2015, pp.1-12.

Horn, J.F., Yang, J.F., He, C., Lee, D., Tritschler, J.K. “Autonomous Ship Approach and Landing Using Dynamic Inversion Control with Deck Motion Prediction,” 41st European Rotorcraft Forum, Munich Germany, September 2015.

Enciu, J., Horn, J.F., and Langelaan, J.W., “Formation Control of a Rotorcraft Multi-Lift System,” 41st European Rotorcraft Forum, Munich Germany, September 2015.

Tritschler, J.K., Horn, J.F., and He, C., “Objective Function Development for Optimized Path Guidance for Rotorcraft Shipboard Recovery,” AIAA Atmospheric Flight Mechanics Conference, Dallas, TX, June 2015.

Thorsen, A.T. and Horn, J.F., “Aerobatic Maneuvers of a Conventional and Compound Rotorcraft – Flight Path Generation and Dynamic Simulation,” AIAA Atmospheric Flight Mechanics Conference, Dallas, TX, June 2015.

Oruc, I., Horn, J.F., Polsky, S., Shipman, J. and Erwin, J., “Coupled Flight Dynamics and CFD Simulations of Helicopter/Ship Dynamic Interface,” American Helicopter Society 71st Annual Forum Proceedings, Virginia Beach, VA, May 2015.

Schafer, S., Horn, J.F., and Cooper, J., “Flight Test Measurement of Ship Airwake Disturbances using Small-Scale Rotorcraft,” American Helicopter Society 71st Annual Forum Proceedings, Virginia Beach, VA, May 2015.

Spires, J.M. and Horn, J.F., “Multi-Input Multi-Output Model-Following Control Design Methods for Rotorcraft,” American Helicopter Society 71st Annual Forum Proceedings, Virginia Beach, VA, May 2015.

Zheng, A. and Horn, J.F., “Investigation of Bandwidth and Disturbance Rejection Properties of a Dynamic Inversion Control Law for Ship-Based Rotorcraft,” American Helicopter Society 71st Annual Forum Proceedings, Virginia Beach, VA, May 2015.

Vashisth, A., Bakis, C., Ruggeri, C., Henry, T., and Roberts, G., “Effects of Nanosilica Filler on the Ballistic Impact Tolerance of Carbon/Epoxy Tubes Loaded in Torsion,” American Helicopter Society 73nd Forum Abstract, Fort Worth, TX, May 2017.

Henry, T. C, Bakis, C. E. and Smith, E. C., “Determination of Effective Ply-Level Properties of Filament Wound Composite Tubes Loaded in Compression,” J. Testing and Evaluation, 43(1):20130159 (2015), 12 p. (SMART Fellowship funding).

Henry, T. C., Bakis, C. E., and Smith, E. C., “Viscoelastic Characterization and Self-Heating Behavior of Laminated Fiber Composite Driveshafts,” J. Materials and Design, 66:346-355 (2015). (SMART Fellowship funding).

Zhu, B., Rahn, C. D., and Bakis, C. E., “Fluidic Flexible Matrix Composite Vibration Absorber for a Cantilever Beam,” J. Vibration and Acoustics, 137(2):021005 (2015), 11 p. (NSF funding).

Tallman, T. N., Gungor, S., Wang, K. W., and Bakis, C. E., “Damage Detection via Electrical Impedance Tomography in Glass Fiber/Epoxy Laminates with Carbon Black Filler,” Structural Health Monitoring, 14(1):100-109 (2015). (ARO funding).

Zhu, B., Rahn, C. D., and Bakis, C. E., “Fluidic Flexible Matrix Composite Damping Treatment for a Cantilever Beam,” J. Sound and Vibration, 340:80-94 (2015). (NSF funding).

Gungor, S., and Bakis, C. E., “Anisotropic Networking of Carbon Black in Glass/Epoxy Composites using Electric Field,” J. Composite Materials, 49:535-544 (2015). (ARO funding).

Henry, T. C., Bakis, C. E., Miller, S. W., and Smith, E. C., “Multi-Objective Optimal Design of Composite Rotorcraft Driveshaft Including Strain Rate and Temperature Effects,” Composite Structures, 128:42-53 (2015). (SMART Fellowship funding).

Miller, S. W., Little, E. J., Yukish, M. A., Bakis, C. E., and Smith, E. C., “Rate Effects and Environmental Sensitivity of Textile Energy Absorbers,” J. American Helicopter Society, 60:022009 (2015), 10 p. (VLC funding).

Makeev, A., Bakis, C., Strauch, E., Chris, M., Holemans, P., Miller, G., Nguyen, D., Spencer, D., and Patz, N., “Advanced Composites Materials Technology for Rotorcraft Through the Use of Nanoadditives,” J. American Helicopter Society, 60:032008 (2015), 10 p. (VLC funding)

Tallman, T. N., Gungor, S., Wang, K. W., and Bakis, C. E., “Tactile Imaging and Distributed Strain Sensing in Highly Flexible Carbon Nanofiber/Polyurethane Nanocomposites,” Carbon, 95:485-493 (2015). (ARO funding).

Little, E. J., Bakis, C. E., Bark, L. W., Willis, R. M., Miller, S. W., Yukish, M. A., and Smith, E. C., “Laboratory and Field Evaluations of Textile Energy Absorbers for Crashworthy Cargo Restraints,” Proc. 71st Forum, Vol. 2, American Helicopter Society, Alexandria, VA, 2015, ISSN 15522938, pp. 1016-1022. (VLC funding).

Bakis, C. E., Sharma, A, and Wang, K. W., “Alignment of Carbon Nanotubes in Glass Fiber Composites using AC Electric Field,” Proc. 20th Intl. Conf. on Composite Materials, ICCM-20, 2015. Online Proceedings: http://www.iccm20.org, 11 p. (ARO funding).

Bakis, C. E., and Ripepi, M., “Transverse Mechanical Properties of Unidirectional Hybrid Fiber Composites,” Proc. 30th Technical Conference, American Society for Composites, X. Xiao, A. Loos, D. Liu, eds., DEStech Publications, Lancaster, PA, 2015, ISBN 978-1-60595-225-3, Paper No. 1762, 12 p. (CD ROM). (DOE funding).