Technical Papers

2011 Technical Papers


Palacios, J., Smith, E., Rose, J., and Royer, R., “Instantaneous De-Icing of Freezer Ice via Ultrasonic Actuation,” AIAA Journal, Vol. 49 No. 6, June 2011, pp. 1158-1167.

Palacios, J., Smith, E., Rose, J., and Royer, R., “Ultrasonic De-Icing of Wind-Tunnel Impact Icing,”Journal of Aircraft, Vol. 48 No. 3, May-June 2011, pp. 1020-1027.

P. Romano, E. Smith, and S. Conlon, “Investigation of Contact Acoustic Nonlinearities on Metal and Composite Airframe Structures via Intensity Based Health Monitoring,” 67th American Helicopter Society Forum, Virginia Beach VA, 8pp (May 2011).

Henry, T. C., Tiwari, C., Bakis, C. E., and Smith, E. C., “Manufacture and Test of Extension-Twist Coupled Energy Absorbing Composite Tubes,” Proc. 67th Forum, Vol. 2, American Helicopter Society, Alexandria, VA, 2011, pp. 895-905.

S.C. Conlon, F. Semperlotti, and P.Q. Romano, “,” INTER-NOISE 2011, September 4-7, Osaka Japan.

Zindel, D., and Bakis, C. E., “Nonlinear Micromechanical Model of Filament-Wound Composites Considering Fiber Undulation,” Mechanics of Composite Materials, 47(1):73-94.

F. Semperlotti, S.C. Conlon, and E.C. Smith, “An Integrated Structural Intensity based Damage Detection Approach: State of the Art and Future Developments,” Proceedings of the 8th International Workshop on Structural Health Monitoring, Stanford University, (September 2011).

Roos, C., and Bakis, C. E., “Multi-Physics Design and Optimization of Flexible Matrix Composite Driveshafts,” Composite Structures, 93:2231-2240.

F. Semperlotti, S. Conlon, A. Barnard, “Airframe Structural Damage Detection: A Nonlinear Structural Surface Intensity based technique,” Journal of the Acoustical Society of America 129(4), EL121-EL127, 2011.

Banks,Jeffrey, Todd Batzel, Robert Keolian, Matt Poese, Terrance Lovell, Mitch Lebold, Karl Reichard, Kevin Cunningham, “Power System Prognostics for the U.S. Army OH-58D Helicopter,” IEEE Aerospace Conference, Big Sky, MT, 2011.

Bakis, C. E., Smith, E. C., and Sollenberger, S. G., “Development and Validation of a Self-Heating Model for Thick, Mixed Angle Ply Composite Shafts under Rotating Bending Load,” Proc. 26th Technical Conference, American Society for Composites, M Hyer, S. Hoa, O. Ochoa, and M. Hojjati, Eds., DEStech Publications, Lancaster, PA, 2011, Paper No. 1201, 19 p. (CD ROM).

Lissenden, C.J., W.L. McGill, and S. Li, “Ultrasonic guided wave SHM for probabilistic fatigue crack growth prognostics,” In: Structural Health Monitoring, F.K. Chang, Ed., DEStech, Lancaster, pp. 1940-1947.

Scarborough, L., Rahn, C., and Smith, E.C., “Fluidic Composite Tunable Vibration Isolators,” Journal of Vibration and Acoustics, 2011.