2016 Technical Papers
Chang, L., Yeau-Ren Jeng, and Qingtao Yu. “Parametric Analysis of Rolling/Sliding Line Contacts Under Boundary and Near Boundary Lubrication Conditions,” Tribology Transactions, 59.1 (2016): 119-127.
Cheng, B., Han, Y., Brentner, K., Palacios, J., and Morris, P., “Rotor Broadband Noise Due to Surface Roughness during Ice Accretion”, 2016 Scitech.
Chillara, V. K., Ren, B., and Lissenden, C. J., “Guided wave mode selection for inhomogeneous elastic waveguides using frequency domain finite element approach,” Ultrasonics 67 (2016) 199–211.
Corle, E., Ferguson, K., and Schmitz, S., “Parallel Evolutionary Optimization for Rotorcraft Design,” AHS International 72nd Forum Proceedings, West Palm Beach, FL, May 17-19, 2016.
Corle, E., Schmitz, S., Singh, R., Kang, H., and Floros, M., “RCAS Load Predictions of the SMART Rotor,” AHS Technical Meeting on Aeromechanics Design for Vertical Lift, San Francisco, CA, January 20-22, 2016
Enciu, J., Horn, J.F., and Langelaan, J.W., “Formation Control of a Rotorcraft Multi- Lift System,” Journal of the American Helicopter Society, Accepted for publication (JAHS-1880-Jun-2016).
Enciu, J. and Horn, J.F., “Flight Performance Optimization of a Multi-Lift Rotorcraft Formation,” Journal of Aircraft, Accepted for publication (2016-06-C034111).
Han, Y., Palacios, J. “Heat Transfer Evaluation on Ice Roughened Cylinders in Transition Regime,” 8th AIAA Atmospheric and Space Environments Conference, Washington, D.C. June 13-17, 2016.
Han, Y., Palacios, J. “Surface Roughness and Heat Transfer Prediction for Development of an Improved Aircraft Ice Accretion Modeling Tool,” 8th AIAA Atmospheric and Space Environments Conference, Washington, D.C. June 13-17, 2016.
Han, Y., & Palacios, J. “Surface Roughness and Heat Transfer Improved Predictions for Aircraft Ice Accretion Modeling.” AIAA Journal, accepted for publication, September 2016, August 2016.
Han, Y., & Palacios, J. “Heat Transfer Evaluation on Ice-Roughened Cylinders.” AIAA Journal – Technical Note, accepted for publication, September 2016, August 2016.
Hanson, DH, Kinzel, MP, “Application of the Discrete Element Method to Model Ice-Roughened Airfoils,” ”AIAA Aviation Conference, Washington, D.C, June 2016 (abstract submitted).
Hanson, DH, Kinzel, MP, Han, Y, Palacios, J, “Direct Computation of Skin Friction and Heat Transfer of Ice-Roughened Airfoils,” AIAA
Aviation Conference, Washington, D.C, June 2016 (abstract submitted).
Henry, T. C., and Bakis, C. E., “Compressive strength and stiffness of filament-wound cylinders,” Journal of Reinforced Plastics and Composites 2016, Vol. 35(21) 1543–1553.
Holmes, W., and Langelaan, J. W., “Autonomous Ship-board Landing using Monocular Vision,” Proceedings of the American Helicopter Society 72nd Annual Forum, West Palm Beach, Florida, May 17-19, 2016.
Kambampati, S., Hoover, T., Smith, E., and Maughmer, M., “Multidisciplinary Optimization for High Speed, High Efficiency Tiltrotors with Wing Extensions”, AHS – Aeromechanics Design for Vertical Lift, San Francisco 2016.
Kambampati, S., Hoover, T., Smith, E., and Maughmer, M., “Multidisciplinary Optimization for High Speed, High Efficiency Tiltrotors with Wing Extensions and Winglets”, AHS Forum, Florida 2016.
Kody, F., Corle, E. L., Maughmer, M. D., and Schmitz, S., “Higher-Harmonic Deployment of Trailing-Edge Flaps for Rotor-Performance Enhancement and Vibration Reduction,” Journal of Aircraft, Vol. 53, No. 2, March-April 2016, pp. 333- 342. doi: 10.2514/1.C033335
McIntyre, S. “A Multi-Scale Simulation Approach for Geared Transmission Aero- thermodynamics,” PhD Dissertation, The Pennsylvania State University Department of Aerospace Engineering, May 2016.
Reddinger, J.P., and Gandhi, F., “Response Surface Estimation of Trim Controls for a Compound Helicopter with Control Redundancy,” American Helicopter Society 72nd Annual Forum Proceedings, West Palm Beach, FL, May 2016.
Reich D., Willits S., and Schmitz S., “Flow Visualization of Helicopter Rotor Hub/Pylon Aerodynamic Interaction,” American Physical Society Gallery of Fluid Motion, November 2016.
Reich D., Shenoy R., Smith M. J., and Schmitz S., “A Review of 60 Years of Rotor Hub and Wake Physics, 1954 – 2014,” Journal of the American Helicopter Society, Vol 61 (2).
Reich D., “Experimental Investigation of Helicopter Rotor Hub Drag and Wake Physics,” Poster Presentation at The Pennsylvania State University College of Engineering Research Symposium, April 2016.
Ren, B., and Lissenden, C. J., “PVDF Multielement Lamb Wave Sensor for Structural Health Monitoring,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, VOL. 63, NO. 1, January 2016.
Ren, B., and Lissenden, C. J., “Modal content-based damage indicators for disbonds in adhesively bonded composite structures,” Structural Health Monitoring 2016, Vol. 15(5) 491–504.
Ren, B., and Lissenden, C.J., “PVDF array sensor for Lamb wave reception: aircraft structural health monitoring,” In: Review of Progress in Quantitative Nondestructive Evaluation, Vol. 35, D.E. Chimenti, L.J. Bond, Eds., American Institute of Physics Proc. 1706, 030011. 2016.
Rudenko, N.A., S.M. Hromisin, and D.K. McLaughlin, “Thermal Characterization of a Dual Impinging Jet Flow Field with a Heated Jet,” presented at the 46th AIAA Fluidic Dynamics Conference, Washington, DC, June 13-17, 2016, AIAA No. 2016-4255.
Sharma, K. and Brentner, K. S., “Acoustic Assessment for Design and Analysis of Rotorcraft,” AHS 72nd Annual Forum, West Palm Beach, Florida, USA, May 17-19, 2016.
Soneson, G.L., Horn, J.F., and Zheng, A., “Simulation Testing of Advanced Response Types for Ship-Based Rotorcraft,” Journal of the American Helicopter Society, Vol. 61, (3), July 2016, pp. 1-13.
Thorsen, A.T. and Horn, J. F., “Aerobatic Maneuvers of a Compound Rotorcraft at High Advance Ratios – Flight Path Generation and Dynamic Simulation,” AIAA Atmospheric Flight Mechanics Conference, AIAA AVIATION Forum, (AIAA 2016- 3391).
Thorsen, A.T. and Horn, J. F., “Development and Evaluation of a Unified Control Architecture for a Compound Rotorcraft in Maneuvering Flight,” AIAA Atmospheric Flight Mechanics Conference, AIAA AVIATION Forum, (AIAA 2016-3392). (Submitting to AIAA Journal of the Guidance, Control, and Dynamics)
Vashisth, A., and Bakis, C. E., “Characterization of Nanosilica Filled Bis F Epoxide with Diamino Diphenyl Sulfone Curing Agents,” Proc. 31st Technical Conference, American Society for Composites, B. D. Davidson, J. G. Ratcliffe, and M. W. Czabaj, eds., DEStech Publications, Lancaster, PA, 2016, ISBN 978-1-60595-316-8, Paper No. 2729, 15 p. (CD ROM).
Vieira, B.A.O. and Maughmer M.D., “An Unsteady-Aerodynamic Model for Deployable Gurney Flaps Based on Indicial Concepts,” Accepted/In Press – Journal of Aircraft, 2016. doi:10.1899/15-9834.6.
Walsh, G., Brentner, K. S., Jacobellis, G., and Gandhi, F., “An Acoustic Investigation of a Coaxial Helicopter in High-Speed Flight,” AHS 72nd Annual Forum, West Palm Beach, Florida, May 17-19, 2016.
Yu, Q. “Development of a Gear-Meshing Tribology Model with Application to Loss- of-Lubrication Analysis,” PhD Dissertation, The Pennsylvania State University Department of Mechanical Engineering, August 2016.
Yu, Q., McIntyre, S., Kunz, R., Chang, L., Bill, R. “A Physics-based Tribology Model and Parametric Assessments of Loss-of-Lubrication Using Reduced-Order System Level Analysis,” 72nd Annual AHS Forum, West Palm Beach, Florida, May 2016.